Advantages and performance of steel wire seal

Advantages and performance of steel wire seal

Steel wire seal, as the name implies, made of steel wire, it can lock some easy to be stolen with a good sign of the door lock, the advantages of steel wire seal is firm, reliable, cost-effective is relatively high. Because it is very convenient to use, it is welcomed in the market, and this material also has a certain anti-corrosion effect. Since the beginning of recent years, steel wire seals are also relatively high in the sales rankings. Steel wire seals can be used in many industries and are widely used in society.

It is made of a lock body clip spring type steel car structure, the head is covered with glue, the steel wire diameter is 1.8mm, aviation grade antirust steel wire is made of good steel and ABS plastic composite, the pulling force can exceed 2500 Newton. This product is currently on the market better stainless steel car lock products, but also a set of a variety of performance in a high-tech intelligent anti-theft device. It can use laser to print the serial number and company logo to the lock head, and the length can be adjusted. The appearance of the product is beautiful and generous, and the unlocking operation can be completed only by fixing it in the car door when in use. It can also be customized according to the needs of users, and the utility model has strong anti-counterfeiting and anti-theft effects.

Steel wire seal production process is better than ordinary seals, more delicate and beautiful, today's society in the pursuit of development, continuous innovation, in order to meet customer needs. Nowadays, people have higher and higher requirements for the quality of life, and they have more considerations for safety, so they also put forward higher requirements for the quality of products. Any industry is constantly innovating, and it has been developing step by step with the big era. Wire seals are a good example. From the old to the new anti-theft wire seal, it is delicate, strong, hard, many businesses love it. This new type of anti-theft wire seal not only has a high practical value. The important thing is that it can be recycled, which is consistent with the national environmental protection and resource reuse requirements. The material of the steel wire seal is made of natural steel wire fiber, which is harmless, environmentally friendly and healthy, and is not easy to be infected by bacteria. And the production process is zero pollution.

Steel wire seals are usually divided into two categories, that is, tension type and butt type. In daily life, people are used to straightening the steel wire seal directly on the ground, and then nail into the ground. As the name suggests, is their purpose. Because the steel wire seal is a disposable product, once it is put into use, it cannot be reopened, only forced destruction.

The steel wire seal has the function of sun protection and anti-corrosion, and the tension type structure is convenient for the device to use. No deformation, no rust and peeling during use. It can be hot pressed, laser dot printing, company logo or title, coding. It has the characteristics of strong tensile strength, good waterproof performance and high and low temperature resistance. Tensile strength: F≥ 300kg or more, it can be cut off with bolt cutters after locking. Check whether the lock hole of the steel wire seal is stuck, whether the inside is rusty, whether the head is seriously twisted, and if the deformation is serious, it cannot be applied. During the inspection, put the two ends of the steel wire seal into two small steel balls and tighten them. After that, you can insert the wire seal. If the wire is locked, insert the key into the notch of the wire seal. Please be careful to wear the keyhole. After opening the key, put your hand between the steel balls and then pull it out. Fingers can feel the steel ball locking force significantly, a crisp sound. If it is difficult to thread, you can press the steel needle by hand or bend a thin steel wire into a certain angle, so that the effect is better. It should be pointed out that if the clamping force of the steel ball is not significant during the crossing process, it is manifested as rust or steel ball displacement in the steel wire seal, which is useless. Before taking it out, it should be handled first, otherwise it is easy to damage. After wearing, pay attention to the length of wear, this length can not be too long, and can not be too short, wear distance is too short will not ensure that the wire seal can effectively lock the wire. In addition, it is necessary to prevent the phenomenon of broken wires during the threading process, because there is a certain friction between the steel wire and the steel wire, and once the contact is easy to cause damage. Therefore, the two are indispensable, when used up, can only be cut with wire cutters.

How to evaluate the quality of steel wire seals from the appearance depends on the use requirements. At present, many different styles of steel wire seals are sold on the market, including metal heads, ABS plastic wrapping, tightening type, and various forms and types of inserts at both ends. When many people use the product, they cannot have a general understanding of the quality of the product, which results in the use of the process.